Printing auxiliary series
Your current location:Home >> Products >> Printing auxiliary series

Coating Adhesive FST

Uses: Binder for pigment printing
Composition: Acrylonitrile copolymer modified multivariate
Nature: Appearance: milky white viscous liquid pH: 8.0-9.0 
Viscosity: 1500-2500cps Ion: Anionic
Features: Coatings Adhesives FST is diverse degeneration acrylonitrile copolymer, has a very good stability of the chemical structure can form a smooth, soft, easily deformed continuous film, has a very excellent feel and fastness. 
FST paint binder has a similar feel and dye printing, printing area on a lot of the fabric has a very good fastness, and unlike ordinary adhesives impact due to the increased use of touch is very obvious, especially when deep color. 
FST adhesive coating not only has an excellent feel and fastness on cotton, chemical fibers in the acrylic pressure-sensitive adhesive having excellent fastness can not be achieved.
Application: Reference prescription: Total 100% 
FST 5-25% × adhesive coating of approximately 1.5% aqueous thickener Y 
Note: The amount of adhesive coating binders FST: ranging from 5% to 25% based on the amount of color shades. If the color is dark or require special fastness higher, but also an appropriate increase in the amount of binder, the amount of the increase does not affect the feel. 
Reference Process: Printing → drying → Pei drying (150 ° C * 3-5min or 160-170 ° C * 1 .5-2min) 
Note: The combined chemical fiber fabrics appropriate recommendations curing temperature increased to 1 60-170 ° C, more appropriate to extend the baking time to get excellent fastness, specifically to test the decision process according to the actual fabric reasonable circumstances.
Storage: Shelf life: Sealed dark can be stored for 12 months. 
Packing: 50/125kg plastic bucket
My status